Control Devices-ST25-1A ST Series Brass ASME Safety Valve, 125 psi Set Pressure,

Description

Control Devices-ST25-1A ST Series Brass ASME Safety Valve, 125 psi Set Pressure, 1/4" Male NPT
Material Type:
Brass
This Control Devices ST25-1A125 ASME safety valve has a brass body, a 125 psi relief pressure, a 1/4" male NPT threaded inlet connection, and a stainless steel pull ring for manual pressure relief. The valve's brass body, brass valve seat, and the zinc plated steel spring resist corrosion and can be used in operating temperatures up to 250 degrees F. The preset relief pressure is accurate to within +/- 3 percent and a silicon O-ring provides a leak-proof seal to within +/- 10 percent of the relief pressure. This safety valve is American Society of Mechanical Engineers (ASME) safety rated and displays the UV mark for pressure vessel safety valves. It also displays the NB mark for certification in accordance with NB-501, National Board Certification of Pressure Relief Devices. This safety valve has a 116 cubic feet per minute (CFM) flow rate and is suitable for low capacity pressure relief applications such as in home construction air compressors.
Relief valves remove excess pressure or vacuum from a system. The valve openings allow fluids or gases to escape to decrease pressure, and then close once the valve reaches the reseating pressure limit. They also relieve excess vacuum by opening to release a gas into the system and then closing after it reaches its low-pressure limit. Some relief valves have an adjustment mechanism to set the pressure where the valve opens, making it suitable for various applications. Relief valves are rated according to the volume of liquid or gas that can flow through them and the material that the valve is constructed from must be suitable for the fluid or gas, which may be corrosive or at an extreme temperature, in which it operates. Relief valves are used in a variety of applications, such as air compressors, petrochemical and chemical manufacturing, natural gas processing, and power generation.
Control Devices manufactures valves and other flow control devices. The company, founded in 1963, is headquartered in Fenton, MO.
Relief pressure preset to 125 psi with flow rate of 116 cfm
1/4" male NPT threaded inlet connection
Brass construction and stainless steel spring for corrosion resistance
250 degrees F maximum temperature for use in high temperature applications
ASME safety rated with UV and NB marks
Shipping
Fast shipping is very important for us.
Our standard US shipping service is FREE.
Your order will be shipped within 1-4 business days upon full payment received.
Your order will be delivered within 2-10 business days after the handling time.
We don't normally ship to Outside of US , Alaska/Hawaii, APO/FPO,
US Protectorates such as
Puerto Rico.If you order for these location, handling time and shipping time will be longer (up to 21 days)
Once you place the order , we will not able to cahnge the address, or cancel the order. If you need to cancel, you'd need to return after you receive item.
We reserve the right to cancel any order for any reason at any time.
We are not responsible for undeliverable addresses.
Returns and payment
We offer a 30 days return policy from order date.
We allow PayPal and Credit Card as payment method.
FeedBack
Your feedback very important to us, after you get your package and if you are
satisfied with our service
please leave us a positive feedback !
If you have any problem with your order / any questions please before leave any type of feedback
For any questions, using eBay contact system
Please visit our eBay store to check out other items for sale!
Thank you for shopping at our store.